Filters
Search

Alarm Communicators

Our communicators correspond with our motto - Simplicity. Applied. They are designed to be easy to install and operate. The devices come preconfigured, wiring is simple and intuitive. With our platform we provide you with remote access to the communicators for diagnostics and management, thus saving you precious time and boosting your customers' loyalty with superior response time on support issues. For the most common alarm panels we support UDL - transparent remote programming with the panel manufacturer's software.

Specifications

  • Dual Band UMTS/HSPA/ 850/1900MHz
  • ARM11 processor, 2MB RAM, 7MB Flash
  • Dial Capture interface supporting Ademco ContactID
  • 1 digital input, 1 digital output
  • Build-in WorldSIM chip
  • SMS backup of alarm events
  • Supply voltage +10 to +17 VDC
  • Power Consumption Nominal 15mA, Peak 200 mA
  • Ultra-Compact Dimensions: 1.2''x1.8''x0.6'' (30x45x15 mm) - the world's smallest communicator
  • Weight: 0.9 oz (25 g) without antenna

     

 

Specifications

  • GSM/GPRS Quad-band, GPRS class 12
  • Multipath signalling - GPRS/SMS
  • ARM9 processor, 512KB RAM, 1.5MB Flash
  • Dial Capture interface supporting Ademco ContactID
  • Universal DTMF model for dial-capture
  • Serial interface for integration with compatible alarm panels
  • up to 3 digital input
  • up to 2 digital outputs
  • Build-in SIM chip
  • Ultra-Compact Dimensions: 30x45x15 mm - the world's smallest communicator
  • Weight: 25 g (0.9 oz) without antenna
  • Conforms to EN 50136/ATS 5 (Grade 4). 

     

 
Product nameDetails
MN01-DTMF GPRS communicator, 1 digital input, 1 transistor output, DTMF decoder(phone line emulator), Ademco ContactID
MN01-3IN GPRS communicator, 3 digital inputs, 1 transistor output
MN01-PARADOX GPRS communicator, 2 digital inputs, 1 transistor output, serial port for Paradox Evo, SP/MG and 17x8
MN01-TEXECOM GPRS communicator, 2 digital inputs, 1 transistor output, serial port for Texecom Premier, Elite
MN01-TELETEK GPRS communicator, 2 digital inputs, 1 transistor output, serial port for Teletek Eclipse, CA62 and Vega

Specifications

  • Multipath signalling (model specific) - Cellular LTE/4G/3G/GPRS and LAN
  • ARM9 processor, 512KB RAM, 1.5MB Flash
  • LAN Ethernet 10/100 (optional) 
  • Dial Capture interface supporting Ademco ContactID
  • Universal DTMF model for dial-capture
  • up to 8 digital inputs
  • up to 4 digital outputs
  • up to 3 serial ports - UART, RS232, RS485
  • Dual SIM card (optional)
  • Dimensions: 2.48" x 3.54" x 1.26" (63 x 90 x 32 mm)
  • Weight: 3 oz (85 g) without antenna
  • Conforms to EN 50136/ATS 5 (Grade 4)
  • Expansion modules:
  • 433 MHz radio transceiver
  • RFID 125 KHz or 13.56 MHz NFC/MiFare Card Reader
  • Most 3rd. party IP Cameras
 
Product nameDetails
MQ03-4I GPRS communicator, 4 digital inputs, serial port
MQ03-8I GPRS communicator, 8 digital inputs, serial port
MQ03-4I-DTMF GPRS communicator, 4 digital inputs, 2 transistor outputs, DTMF decoder, serial port
MQ03-8I-LAN GPRS/LAN communicator, 8 digital inputs, serial port
MQ03-LTE LTE/4G/3G/LAN communicator, 2 digital inputs, 2 digital outputs
MQ03-4I-LAN-DTMF GPRS/LAN communicator, 4 digital inputs, 2 transistor outputs, serial port, DTMF decoder
MQR03-RECEIVER GPRS/LAN receiver, RS-232 serial port 

Specifications

  • LTE 700/850/1700/1900 MHz with 3G/4G 850/1900 MHz fallback 
  • ARM11 processor, 2MB RAM, 7MB Flash
  • Dial Capture interface supporting Ademco ContactID and SIA
  • 1 digital input, 1 digital output
  • 2 Built-in World SIM chips 
  • SMS backup of alarm events
  • Supply voltage +12 to +30 VDC 
  • Power Consumption Nominal 15mA, Peak 200 mA
  • Ultra-Compact Dimensions: 1.6'' x 1.95'' x 0.82'' (40.6 x 50 x 21 mm)
  • Weight: 1.1 oz (30 g) without antenna
 

Network Redundancy

Our WorldSIMs support all major telecoms in more than 100 countries for maximum coverage and guaranteed connection. The device automatically switches between providers to stay always connected. In case of IP connection loss - it will send a SMS.

  

Quick & Easy Installation

The communicators come with pre-activated cellular connectivity service and pre-programmed according to the clients needs, eliminating the typical installation hassle and efforts and saving your precious time.
For most installations our devices are simply Plug'n'Play.

  

Works with any intruder alarm system

Our communicators support virtually any intruder alarm system – through digital outputs (PGMs), serial port, or a Dial capture interface. The most universal form of connectivity is the Dial Capture interface - simply connect the Ring and Tip, configure the panel and you are set to go.

  

Smartphone App

Remotely arm and disarm your panel. Be always informed, receiving real-time push, text and email notifications about who's entering/leaving the premises and when. Review events log back in time.

  

Low, flat monthly rate

Improved profitability, predictability and cost control with our "rock-solid" flat price. The standard offering includes 10 minute polling, transfer of all events from the alarm panel and SMS backup in case of lost IP connection.